weBoost 470121 Drive 4G-M Mobile Signal Booster Kit [Discontinued]

The weBoost 470121 Drive 4G-M Signal Booster Kit is the newest version of the Wilson 470108 Drive 4G-M. The Drive 4G-M boosts the 2G, 3G, and 4G LTE networks from all major carriers, giving you fewer dropped calls, increased call clarity and the fastest 4G LTE download speeds possible. Unlike cradle signal boosters, the Drive 4G-M communicates with your phone wirelessly and does not require any direct connection or for your phone to sit in a cradle, and since it's wireless, the Drive 4G-M also supports multiple phones and data devices at the same time. The weBoost 470121 Drive 4G-M's inside coverage area will depend on your existing outside signal strength. In areas where you get a moderate existing outside signal, the Drive 4G-M will fill a normal vehicle with boosted coverage. As the outside signal gets weaker, you may have to keep your phone within about 18 inches from the inside antenna in order to take advantage of the boosted signal. Supported Carriers The weBoost Drive 4G-M Kit supports the voice, 3G, and 4G LTE networks from all major carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you. Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit: AT&T 2G, 3G, 4G HSPA+ & 4G LTE Verizon 2G, 3G & 4G LTE Sprint 2G, 3G & 4G LTE T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE US Cellular 2G, 3G & 4G LTE All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment. Included Items weBoost Drive 4G-M Mobile Amplifier 859913 - weBoost DC Power Adapter 314401 - Wilson Mini Magnet Mount Antenna with SMA-Male Connector & 10' Coax Cable 301126 - Inside Low-Profile Antenna AccessoriesThe Drive 4G-M can be outfitted with additional accessories to help with installation and operation. For use in larger vehicles, the optional Wilson Trucker Antenna is more powerful. Boats can benefit from the option Wilson Marine Antenna. If you have any questions regarding which outside antenna may work best for you, feel free to contact us for help. Installation Overview Installing the Drive 4G-M kit is very easy and can usually be done in just a few minutes. Because nothing is permanent, the kit can be transferred to another vehicle as needed. To start, mount the mini-mag antenna on the roof of the vehicle. The antenna must be stuck to a metal surface. If you have a sunroof, position the antenna well behind the sunroof to increase the separation between the inside and outside antennas. Run the cable in through a door opening, under the door weather stripping to protect the cable. Connect the cable to the amplifier's Outside Antenna port. To the inside connect the inside antenna cable. Locate the inside antenna near where you'll typically be using the phone, for example, in the center console or on the side of the driver's seat. Ensure that the cables and amplifier won't be damaged if the front seats are adjusted. See the below video for more information.