weBoost RV35 Signal Booster | 476066
Included with your order:
- 90-Day Returns
- Lifetime Tech Support
- 2-Year Warranty
- Lowest Price Guarantee
We answer questions for free, before and after you buy.
Signal SpecialistMon to Fri, 9 to 5 ET
Boosts 5G and 4G LTE on Every US Carrier, Including:
MVNOs like Mint, Cricket, and Visible run on these networks too, along with more than 90 regional carriers.
Introducing the RV35
At a glance
How It Works
Each of the three pieces below does a different job, and where you put it decides how well the next one works.
The Outside AntennaReceives signal from distant cell towers and passes it over a cable to the amplifier.
The AmplifierReceives the signal from the outside antenna, boosts it significantly, then passes it to the inside antenna.
The Inside AntennaBroadcasts the boosted signal throughout the space for clear calls, reliable texts, and fast data.
The booster also works in reverse. The inside antenna receives signal from the devices in the vehicle, the amp boosts it up, and then the outside antenna broadcasts the strong signal back to the distant cell towers. This gives you a strong, reliable two-way connection to the cell tower.
How Much Coverage Should You Expect?
How much coverage you get depends on the signal you already have outside. The stronger it is out there, the farther the boosted signal carries inside.
Need a Stronger Setup?
A stronger system changes the outside antenna, the amplifier, or both. The one below is the next step up from this booster.

How the Installation Process Works
The outside antenna and its cable are most of the work, and the steps below are the whole job.
Pick the Spot for the Outside Antenna
It mounts to a ladder or a pole with the included L-bracket and U-bolts, or to a flat, solid spot on the roof with fasteners you supply and seal. It needs to sit above the roof line and above anything else up there, and mounting it toward the back of the RV puts more cable between it and the inside antenna, which is what the system wants. Check your overall height once it is up, because the antenna adds to it and the states set a limit.
Get the Cable Inside
The 30 foot cable from the outside antenna comes in through an existing junction box or cable gland if the RV has one, through the rubber gasket of a slide out, through the back door of a toy hauler with the flat entry cable, or through a hole you drill and seal.
Mount the Inside Antenna
The small panel antenna sticks on with the included adhesive pad, and the best spot is midline along the ceiling of the RV, or a wall if the ceiling is not an option. It has a 13 foot cable, it should sit as far from the outside antenna as the RV allows, at least 8 inches from anyone, and never where an airbag deploys.
Place the Booster and Connect the Cables
The booster goes in a cabinet or closet within reach of both cables. The outside antenna cable threads onto the larger F connector and the inside antenna cable onto the smaller SMA connector, hand tight only.
Plug It In
The included power supply plugs into a 120 volt outlet in the RV. A solid green light means it is boosting. A solid green light means it is boosting. A blinking light means it has pulled one band back on its own, and if the phones are working you can leave it. Solid red or solid yellow means a band has shut off, so tighten the connections first, then give the antennas more distance for red or move the outside antenna for yellow.
Not sure it will fit your vehicle? Send us a message before you order and we will work out where the outside antenna goes on yours.
What's Included
Everything below ships together.
-
RV35 Booster
-
Outside Omni Antenna
-
Mini Panel Inside Antenna with 13 ft Cable and Adhesive Pad
-
L-Bracket and Pole Bracket
-
2 x U-Bolts with Nuts and Washers
-
4 x Bolts and Wing Nuts for the Bracket
-
30 ft RG6 Coax Cable
-
Window Entry Cable
-
AC Power Supply
The Support That Comes With It
Installation Support
Our team has guided thousands of vehicle installs.
Placement Help
If the boost is smaller than you expected, send us a message and we will work through where the antennas are sitting. That is one of the first things to check.
Lifetime Support
The help does not run out when the warranty does. We are still here for a different vehicle, a new phone, or a setup that stopped working the way it used to.
Specifications
These are the specifications we have on file for this booster.
| SKU | 476066 |
| UPC | 810005966856 |
| Warranty | |
| Condition | |
| Gain (Up/Down) | |
| Frequencies Supported | |
| Outside Antenna Type | |
| Inside Antenna Type | |
| Number of Inside Antennas | |
| Impedance | |
| Power Requirements | |
| Connectors | |
| Dimensions |
Product Documents
Open any of them before you order or after your booster arrives.
weBoost RV35 (476066) Spec Sheet weBoost RV35 (476066) Installation Guide weBoost RV35 (476066) One PagerRegulatory Advisories
The FCC requires the advisory below on every consumer signal booster, including this one.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the three largest carriers (AT&T, T-Mobile, and Verizon) and more than 90 regional carriers have given blanket consent for use of all boosters certified to the current FCC standards.
Why Buy from Us
You're not just buying a booster. You're getting the team behind it.
These are the people who answer when you send us a message.








