weBoost Cabin Signal Booster | 472059
Included with your order:
- 90-Day Returns
- Lifetime Tech Support
- 2-Year Warranty
- Lowest Price Guarantee
Please Note:
- We are not able to offer free shipping on this item due to its size and/or weight.
Boosts 5G and 4G LTE on Every US Carrier, Including:
MVNOs like Mint, Cricket, and Visible run on these networks too, along with more than 90 regional carriers.
Introducing the Cabin
At a glance
How Much Coverage Should You Expect?
The existing outside signal strength and the amplifying power of the booster together determine how much coverage you'll get.
No signal outside? A booster needs a small amount of signal to amplify, so if you truly do not have anything outside, a booster won't solve your problem.
How It Works
The booster receives what signal reaches your land, amplifies it, and broadcasts it inside the cabin. It also works in reverse, boosting the signal from your phones back to the tower, so calls hold up in both directions.
The Outside Antennacommunicates back and forth with cell towers from the top of the 24 foot pole, above the obstructions.
The Amplifierboosts any cell signal it receives from the outside antenna.
The Inside Antennabroadcasts the boosted signal inside the cabin.
Questions on How to Install It?
Our team is here to answer any questions you have, including where the outside antenna should go, how to route the cable, and where the inside antenna belongs.
Do you have questions before you buy? Send us a message and we will answer them.
Already Have a Pole or Mast?
Then we'd recommend going with the Home MultiRoom, which has the same components as the Cabin, just without the included telescoping pole.

How the Installation Process Works
The Cabin installs differently from our other home boosters: the outside antenna goes up on a 24 foot telescoping pole instead of the roof. The pole is the part that takes the time, and the included guide walks you through it.
Place the Inside Antenna and Booster
Put the inside antenna where you need the strongest signal: mounted to a wall, laid horizontally, or standing on its kickstand. Place the booster at least 24 inches away, near an outlet.
Assemble the Pole
Press the pole into the pole foot, mount the outside antenna to the top section with its bracket, and fasten the pole bracket around the seventh or eighth section, about 18 feet up.
Pick the Spot
You need solid ground for the pole foot (compressed dirt, concrete, or wood decking, but not Hardie board) below a stable stretch of fascia for the bracket, with the outside antenna at least 50 horizontal feet or 20 vertical feet from the inside antenna. Do a soft install first: run the cables and power up (steps 5 and 6), test your bars, then come back to raise and anchor.
Raise and Anchor the Pole
Extend the pole, fasten the bracket to the fascia, and anchor the pole foot to the ground: ground stakes for dirt, concrete anchors for a slab, lag bolts for decking. The pole foot is designed for permanent attachment, so anchor only after the soft install.
Route the Cables
Run one 15 foot cable from the antenna down the pole. The window entry cable carries the connection inside without drilling, and the second 15 foot cable takes it from there to the booster's outside antenna port. The 30 foot cable connects the inside antenna. Finger tighten every connection.
Power Up and Aim
Plug the power supply into a wall outlet, ideally through a surge protected power strip, and check that the booster's light is green. Then fine tune: rotate the outside antenna a third of a turn at a time, powering the booster off and on between turns, until the bars near the inside antenna peak.
No Roof Required The pole is the point: it lifts the antenna above the trees and ridgelines that block signal at ground level, without putting you or the antenna on the roof. You will still want a ladder to reach the fascia.
Which Booster Is Right for Your Space?
Compare the different options for boosting signal in your cabin or rural home.
What's Included
Everything below ships together.
-
weBoost Cabin 65 dB Amplifier with Wall Mount Bracket
-
Wide-Band Directional Antenna with F-Female Connector
-
Fabric Covered Inside Antenna with Mounting Bracket
-
24' Telescoping Antenna Pole with Pole Bracket and Pole Foot
-
2 x 15' White RG6 Coax Cables
-
30' White RG6 Coax Cable
-
Window Entry Cable
-
Power Supply
The Support That Comes With It
Installation Support
Our team has decades of combined experience guiding customers through the installation process.
Troubleshooting & Optimization
Our team is here to help you fix problems and maximize system performance.
Lifetime Support
We're here to provide help and guidance for as long as you run the system.
Specifications
The forwardable facts, jargon translated.
| Warranty | 2 Years |
| Gain (Up/Down) | |
| Max Coverage | |
| Frequencies Supported | 700MHz, 800MHz, 1900MHz, 1700/2100MHz |
| Outside Antenna Type | Directional |
| Inside Antenna Type | Directional |
| Number of Inside Antennas | 1 Inside Antenna |
| Impedance | |
| Power Requirements |
For the careful reader
The documents, before you buy.
weBoost Cabin 472059 Installation Guide weBoost Cabin 472059 Spec SheetRegulatory Advisories
The FCC requires the advisory below on every consumer signal booster, including this one.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the three largest carriers (AT&T, T-Mobile, and Verizon) and more than 90 regional carriers have given blanket consent for use of all boosters certified to the current FCC standards. Registration itself is a quick form on your carrier's website, not a permission request, so for nearly every buyer approval is already in place.
Why Buy from Us
You're not just buying a booster. You're getting the team behind it.
Send us a message before you buy, during your install, or any time after. When something is wrong, our team is here to support you.
















