Your Manufacturing Floor Has No Cell Signal.
We Fix That.
Commercial-grade signal booster systems designed by RF engineers for factories, plants, and warehouses. All carriers, all devices, no monthly fees.
-
4.8/5 on Google
-
1,500+ Systems Engineered
Engineered Signal Solutions For
The Problem
Why Manufacturing Facilities Have No Cell Signal
Metal construction, large floor plans, and heavy machinery create some of the worst signal environments for cellular coverage. Steel framing and metal wall panels act as a near-complete shield against cellular frequencies, while building scale pushes work areas far from any exterior wall where residual signal might exist.
Supervisors leave the floor for every phone call. When a machine goes down, your crew walks to the parking lot to call the manufacturer, walks back to relay instructions, and repeats until the problem is solved. On a production line, every one of those trips costs you. Manufacturers already lose 11% of annual revenue to unplanned downtime (Siemens, 2024). Dead zones stretch every incident longer than it needs to be.
Then there's the safety side. OSHA says serious injuries need treatment within 3 to 4 minutes. If a worker gets hurt on the overnight shift and can't call for help from the floor, those minutes are gone before anyone knows something happened.
Emergency calls to 911 may not connect inside the building. Workers in dead zones can't receive alerts or reach help. IoT sensors and connected devices drop signal on the production floor.
Your carrier won't fix this. Carriers build towers to cover geographic areas, not individual buildings.
This isn't an inconvenience. It's a safety and operational liability.
The Solution
Complete Facility Coverage. One System. Every Carrier.
The system captures cellular signal outside your building where coverage is strong, amplifies it to commercial strength, and broadcasts it directly where your team needs it. The outside antenna sits above the roofline where signal is unobstructed, then sends it into the building through shielded cable, bypassing the walls entirely.
- All-carrier coverage from a single system. Employees, vendors, and contractors on any network.
- Custom-designed for your building. An RF engineer (not a salesperson) maps your facility and designs for full coverage.
- No recurring costs. One-time installation. No monthly carrier fees. No service contracts.
- FCC certified and interference-free. Does not interfere with industrial control systems like PLCs or SCADA, which operate on separate frequencies or wired connections.
Steel Building. No Signal.
We Fixed it in 4 Days.
An 85,000 sq ft building materials manufacturing facility in Pennsylvania running 24/7, 365 days a year. Steel construction, concrete walls, and heavy equipment across the production floor. Cellular signal was nearly nonexistent inside the building.
When a machine went down, maintenance crews had to leave the floor, walk to the parking lot to call the equipment manufacturer, then walk back to relay instructions. On a production line where downtime costs hundreds of thousands of dollars, every trip outside meant lost money. On overnight shifts in a remote area, employees had no way to call for help if something went wrong.
Our engineers designed a commercial signal booster system with 15 indoor antennas covering every zone of the facility. Production floor, parts room, quality assurance, control rooms, and offices.
After installation, AT&T and Verizon signal went from nearly zero to strong coverage across 100% of the building, as verified by post-installation RF walk tests. Maintenance crews now troubleshoot equipment issues in real time, right from the floor.
"When a machine goes down at 2 AM, our crew can call the vendor right from the floor. No more running to the nearest exit while the line sits idle."
— Todd K., IT Team Lead, 85,000 sq ft Manufacturing Facility, PA
What Other Customers Are Saying
Facility managers, IT directors, and business owners who solved their signal problems with Wilson Signal Booster.
We installed the solution in our all-steel industrial building. Prior to, cell phone signals were at one bar or nonexistent. Missed calls were a daily occurrence with most of the workers having to walk outside to get a signal. The moment the booster was turned on everyone's cell phones (both AT&T and Verizon), went up to 3-4 bars and the problem of not receiving calls disappeared. It's made all of the difference in the world.
Customer service was outstanding, the engineers worked with me during the whole process, the product performed better than expected and the transaction was effortless.
We installed this solution in our factory. For months we have all been taking cell phone calls outdoors. This boosted our signal and we now have service in our entire plant. I would proudly recommend this product. Wonderful.
HOW IT COMPARES
Signal Booster vs. Distributed Antenna System (DAS)
Cell phone boosters and distributed antenna systems are two options to solve your signal problems. Here's how they compare:
| Cell Phone Signal Booster | Distributed Antenna System (DAS) | |
|---|---|---|
| Cost | $1 - $1.50/sq ft  | $3 - $10/sq ft |
| Installation Time | 1 to 2 weeks | 12 to 18 months |
| Carrier Approval | FCC certified, no approval needed | 6+ months per carrier |
| Recurring Costs | $0/year | $25,000 - $100,000/year  |
| Carrier Support | All carriers simultaneously | Each carrier requires separate agreement |
| Best For | Manufacturing facilities up to 250,000 sq ft | Stadiums, airports, 500,000+ sq ft venues |
Not sure which solution is right for you?
Our engineers will tell you honestly if a signal booster will work or if you need a DAS solution.
Get Your Free AssessmentFour Steps to Full Coverage
Getting reliable signal throughout your facility is easier than you think.
-
Request Your Assessment
Fill out the form or call us. Takes about 2 minutes. No commitment required.
2 Minutes
-
RF Engineer Reviews Your Facility
We analyze your building's construction, layout, square footage, and existing signal environment.
15-Minute Call
-
Custom Proposal Delivered
You receive exact system specs, a coverage map for your facility, and transparent pricing. No hidden fees.
Within 72 hours
-
Installation With Minimal Disruption
Most solutions install in 1 to 2 weeks. We coordinate with your operations team to avoid business interruptions.
1-2 Weeks
Get Your Free Manufacturing Facility Assessment
Our RF engineers assess your space, design the antenna layout, map coverage zones, and quote the complete system, at no cost.
What You'll Receive
Expert building assessment
We analyze your layout, construction materials, and signal environment to map your coverage challenges before recommending any equipment.
Custom system design
Equipment recommendations with antenna placements tailored to your space, plus what coverage to expect and why.
Transparent pricing
A complete quote including equipment, cabling, and installation options. No surprise costs.
What Happens Next
Tell us about your space
Size, type, construction, what you're experiencing
RF engineer designs your system
Antenna placement, cabling, coverage zones tailored to your space
Get your quote with installation options
Complete pricing with timeline, coordinated around your schedule
100% Free, No Obligation
The consultation and system design cost nothing. If it won't work for your building, we'll tell you.
I have the booster in a shop which has a metal exterior, providing essentially no service inside. Now we get 4-5 bars of service over the entire space. No more dropped calls. No more texts not being sent.
Tyler R., Facilities Manager
Tell Us About Your Space
Frequently Asked Questions
Will I get bombarded with sales calls?
Will I get bombarded with sales calls?
No. After you request your assessment, an RF engineer will call you once to discuss your building. That's it. No pressure, no follow-up campaigns. If we're not the right fit, we'll tell you. We'd rather earn your trust than waste your time.
What happens after I submit this form?
What happens after I submit this form?
A signal specialist (not a salesperson) reviews your facility details and reaches out within one business day. You'll have a 15-minute discovery call, then receive a custom system design with coverage map and transparent pricing.
Will installation disrupt our operations?
Will installation disrupt our operations?
We schedule installations around your shifts. Most manufacturing systems install in 1 to 2 days. Our team coordinates with your operations manager to avoid production interruptions. Every zone is tested before the team leaves.
What's the typical cost for a manufacturing facility?
What's the typical cost for a manufacturing facility?
Every facility is different, so exact pricing depends on your building's size, construction type, and existing signal conditions. As a general guide, commercial manufacturing installations typically run as little as $1 per square foot of coverage. That said, a 50,000 sq ft steel building is a different investment than a 200,000 sq ft multi-building campus. Your free assessment includes a detailed, no-obligation quote specific to your building.
Is my facility too small or too complex for this?
Is my facility too small or too complex for this?
We design systems for facilities ranging from 5,000 sq ft shops to large multi-building campuses. The consultation determines what your building actually needs.
Will this cover all carriers and devices?
Will this cover all carriers and devices?
Yes. Every system covers all major carriers (AT&T, Verizon, T-Mobile, and others) simultaneously. Employees, vendors, and contractors on any cellular network will have improved coverage.
Will this interfere with manufacturing equipment?
Will this interfere with manufacturing equipment?
No. Signal boosters are FCC certified and operate on cellular frequency bands. They do not interfere with industrial control systems like PLCs or SCADA, which operate on separate frequencies or wired connections. Two-way radios also use different frequency bands and are unaffected.
What warranty and ongoing support do you provide?
What warranty and ongoing support do you provide?
All systems include a 2-3 year hardware warranty from the manufacturer and lifetime phone & email technical support from our team. Signal boosters are passive systems with no moving parts, designed to operate maintenance-free for years. Our team is available at 1-888-974-8237, Mon-Fri 9am-7pm ET, Sat 10am-3pm ET.