Wilson 460108 Mobile 4G Signal Booster Kit - Voice, 3G & 4G LTE for all Carriers [Discontinued]

SKU: 460108

This product has been discontinued and replaced with:

Description

// The Wilson 460108 Mobile 4G Signal Booster Kit is the most powerful in-vehicle kit available and can help you get a signal where all other boosters fail. The Mobile 4G boosts the 2G, 3G, and 4G LTE networks from all major carriers giving you fewer dropped calls, increased call clarity and the fastest 4G download speeds possible. Unlike cradle signal boosters, the Mobile 4G communicates with your phone wirelessly and doesn't require any direct connection or for your phone to sit in a cradle. Because it's wireless, the Mobile 4G also supports multiple phones and data devices at the same time. The Wilson 460108 Mobile 4G's inside coverage area will depend on your existing outside signal strength. In areas where you get a moderate existing outside signal, the Mobile 4G will fill a normal vehicle with boosted coverage. As the outside signal gets weaker, you may have to keep your phone within about 18 inches from the inside antenna in order to take advantage of the boosted signal. For added durability, the Mobile 4G amplifier is housed in an aluminum case giving it added protection while located under a seat, in the trunk, or in other location within the vehicle. Supported Carriers The Wilson Mobile 4G Kit supports the voice, 3G, and 4G LTE networks from all major carriers in North America. It does not support any WiMAX or iDEN networks. The Wilson Mobile 4G Kit is currently only available for shipment within the United States. AT&T 2G, 3G, 4G HSPA+ & 4G LTE Verizon 2G, 3G & 4G LTE Sprint 2G, 3G & 4G LTE T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE US Cellular 2G, 3G & 4G LTE All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz Included Items 460008 - Wilson Mobile 4G Signal Amplifier 859913 - Wilson 6V/2A DC Power Adapter 301126 - Wilson Mini Magnet Mount Antenna with SMA-Male Connector & 10' Coax Cable Inside Low-Profile Antenna AccessoriesThe Mobile 4G can be outfitted with additional accessories to help with installation and operation. For use in larger vehicles, the optional Wilson RV and Trucker Spring Mount Antenna is more powerful.  Boats can benefit from the option Wilson 308430 Marine Antenna Kit. If you have any questions regarding which outside antenna may work best for you, feel free to contact us for help. Installation Overview installing the Mobile 4G kit is very easy and can usually be done in just a few minutes.  Because nothing is permanent, the kit can be transferred to another vehicle as needed. To start, mount the mini-mag antenna on the roof of the vehicle.  The antenna must be stuck to a metal surface.  If you have a sunroof, position the antenna well behind the sunroof to increase the separation between the inside and outside antennas.  Run the cable in through a door opening, under the door weather stripping to protect the cable.  Connect the cable to the amplifier's Outside Antenna port.  To the inside connect the inside antenna cable.  Locate the inside antenna near where you'll typically be using the phone, for example, in the center console or on the side of the driver's seat.  Ensure that the cables and amplifier won't be damaged if the front seats are adjusted.  See the below video for more information.

Wilson 460108 Mobile 4G Signal Booster Kit - Voice, 3G & 4G LTE for all Carriers [Discontinued]

$399.95

What You Should Know

N/A

Uplink Frequency Ranges (MHz)

N/A

Downlink Frequency Ranges (MHz)

N/A

Max Gain

N/A

Max Uplink Power

N/A

Impedance

N/A

Cable Type

N/A

Color

N/A

Plenum Rating

N/A

RF Connectors

N/A

Antenna Type

N/A

Power Supply

N/A

Frequency Range

N/A

Includes Connectors

N/A

Output Ports

N/A

Output Voltage

N/A

Outside Antenna Options

N/A

Inside Antenna Options

N/A

Number of Inside Antennas

N/A
View product