Product Information
Product Information
You Should Choose This Kit If
You need an all in one solution to provide boosted voice calls and 3G data plus 4G LTE from AT&T, Verizon, Sprint, T-Mobile, and US Cellular for one phone or data device in a vehicle. The Sleek comes with a 4 in magnetic antenna that sticks to the roof of your vehicle and includes a cable that runs in through a door and attaches to the Sleek Cradle. It is powered using a 12V adapter that plugs into a cigarette lighter or 12V power port.
Will This Work For Me?
The Sleek Cradle signal booster is our entry level vehicle signal booster. Being a cradle, your phone or data device does need to stay in the cradle to receive the boosted signal so you'll have to use a bluetooth headset or speakerphone to make or receive calls. The Sleek will only work with one phone at a time.
The Sleek Cradle improves the signals used for both voice calls and Internet access. In areas with a weak signal, the Sleek Cradle will reduce dropped calls, improve call clarity and increase Internet data speeds.
Supported Carriers
All carriers that use the standard dual band frequencies (800 MHz & 1900 MHz) for voice and 3G data plus the 4G LTE networks from most major carriers including:
AT&T 2G/3G/4G HSPA+ (shows as 4G on your phone) & 4G LTE
Verizon 2G/3G & 4G LTE
Sprint 2G/3G & 4G LTE
US Cellular 2G/3G & 4G LTE
Alltel 2G/3G
T-Mobile 2G & 3G, 4G HSPA+ (shows as 4G on your phone), and 4G LTE
All other carriers using 800 MHz and 1900 MHz
Included Items
Wilson Sleek 4G 5-Band Cradle Amplifier for 3G and 4G LTE
Wilson 859963 DC to DC 5V Power Supply for Sleek
Dashboard adhesive mount for Sleek Cradle
Wilson 301126 4" Mini Magnetic Mount Antenna with SMA-Male Connector
Installation Overview
Installing the Sleek signal booster is very easy and because nothing is permanent, it can be moved from one vehicle to another, or brought inside a home or office for use.
Mount the included antenna on the roof of the vehicle. Route the attached coax cable in through a door opening. To protect the cable, run it under the door seal. Connect the cable to the Sleek Cradle. Then just plug in the included 12V power supply and connect it to the Sleek. When you place your phone in the cradle, you should see a stronger signal (it may take up to 30 seconds for your phone's signal strength display to update). If you already have a strong outside signal, you won't see any benefit from the Sleek so try it in a place where you typically have signal trouble. For more information, check out the following video.