The Wilson Mobile 4G Marine Signal Booster Kit is the best kit for boosting signal in your boat or marine craft. The Mobile 4G Marine Kit features a 5-band, 50 dB amplifier, which is the most powerful mobile amplifier allowed by the FCC. The Mobile 4G boosts the 2G, 3G, and 4G LTE networks from all major carriers, giving you fewer dropped calls, increased reception and the fastest 3G & 4G LTE download speeds possible. Unlike some other mobile signal boosters, the Mobile 4G Marine kit communicates with your phone wirelessly, so it doesn't require a direct connection or for your phone to sit in a cradle. Also, because it broadcasts boosted signal to the local area, multiple phones and data devices will receive boosted signal at the same time.
The Wilson Mobile 4G Marine Kit's inside coverage area will depend on your existing outside signal strength. In areas where you get a moderate existing outside signal, the Mobile 4G will provide a boosted signal up to 5 ft from the inside antenna. As the outside signal gets weaker, you may have to keep your phone within about 18 inches from the inside antenna in order to take advantage of the boosted signal. To talk on the phone while moving around the vehicle, just keep your phone near the inside antenna and use a bluetooth headset for mobility. Hotspots can also be left near the inside antenna giving you the fastest internet speeds.
The Wilson Mobile 4G Marine Kit supports the Voice, 3G, and 4G LTE networks from all major carriers in North America. It does not support any WiMAX or iDEN networks. The Wilson Mobile 4G Kit is currently only available for shipment within the Untied States.
- AT&T 2G, 3G, 4G HSPA+ & 4G LTE
- Verizon 2G, 3G & 4G LTE
- Sprint 2G, 3G & 4G LTE
- T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
- US Cellular 2G, 3G & 4G LTE
- All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz
- 460108 - Wilson Mobile 4G Signal Booster Kit
- 859913 - Wilson 6V/2A DC Power Adapter
- 308430 - Wilson Marine Antenna, Marine Mount, and 20 ft Coax Cable
- 301152 - Wilson Slim Low Profile Antenna with SMA-Male Connector & 10' Coax Cable
- 971119 - FME Male to SMA Male Barrel Connector
The Mobile 4G Marine Signal Booster Kit comes with a DC power supply. An AC Power Supply is also available: Wilson 859912 AC/DC 6V Power Supply
Installing the Mobile 4G kit is very easy and can usually be done in just a few minutes.
To start, mount the Marine Antenna using the included marine antenna mount, as high up as possible on the boat or marine vehicle. Run the attached cable into the boat and connect the cable to the amplifier's Outside Antenna port. To the inside connect the inside antenna cable. Locate the inside antenna near where you'll typically be using the phone and aim in the correct direction. Power on the amplifier, and you should immediately begin receiving boosted signal.