Wilson Mobile 4G RV Signal Booster Kit for Voice, 3G & 4G LTE [Discontinued]
Availability: Out of stock
Regular Price: $449.95
Special Price $399.99
The Wilson Mobile 4G RV Signal Booster Kit is the perfect solution for people who regularly travel in RVs, Motorhomes, 5th-Wheels, and other large vehicles, and need better voice calls and data while in remote locations. The Mobile 4G RV Kit features a 5-band, 50 dB amplifier, which is the most powerful mobile amplifier allowed by the FCC. The Mobile 4G also boosts the 2G, 3G, and 4G LTE networks for all of the major carriers in North America, giving you fewer dropped calls, increased reception, and the fastest 3G & 4G LTE download speeds possible. Unlike some other mobile signal boosters, the Wilson Mobile 4G communicates with your phone wirelessly, rather than requiring a direct connection or for your phone to sit in a cradle. Additionally, because it broadcasts boosted signal to the local area, multiple phones and data devices can receive boosted signal at the same time.
The inside coverage area that you receive from the Wilson Mobile 4G RV Kit will depend on the existing outside signal strength in the location where you're traveling or parked. In areas where you get a moderate existing outside signal, the Mobile 4G will provide a boosted signal up to 5 ft from the inside antenna. As the outside signal gets weaker, the coverage area will shrink, until the point where you may have to keep your phone within about 18 inches from the inside antenna to take advantage of the boosted signal. The ideal way to talk on the phone while moving around the vehicle would be to keep your phone near the inside antenna and use a bluetooth headset for mobility. Hotspots can also be left near the inside antenna giving you the fastest internet speeds possible.
The Wilson Mobile 4G RV Kit supports the Voice, 3G, and 4G LTE networks from all major carriers in North America. It does not support any WiMAX or iDEN networks. The Wilson Mobile 4G Kit is currently only available for shipment within the United States.
- AT&T 2G, 3G, 4G HSPA+ & 4G LTE
- Verizon 2G, 3G & 4G LTE
- Sprint 2G, 3G & 4G LTE
- T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
- US Cellular 2G, 3G & 4G LTE
- All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz
- 460108 - Wilson Mobile 4G Signal Booster Kit
- 859913 - Wilson 6V/2A DC Power Adapter
- 311133 - Wilson RV and Trucker Spring Mount Antenna with 13.5 ft. Coax Cable
- 901104 - 3-Way Mount with Spade Stud
- 301152 - Wilson Slim Low Profile Antenna with SMA-Male Connector & 10' Coax Cable
The Mobile 4G RV Signal Booster Kit comes with a DC power supply. An AC Power Supply is also available: Wilson 859912 AC/DC 6V Power Supply
Installing the Mobile 4G kit is very easy and can usually be done in just a few minutes. Since no part of the installation is permanent, the kit can be transferred to another vehicle as needed.
To start, mount the RV Antenna on the exterior of the vehicle using the included 3-way mount, and ensure that the antenna \ extends above the vehicle for a clear, 360 degree view. Run the attached cable into the vehicle and connect the cable to the amplifier's Outside Antenna port. To the Inside Antenna port, connect the inside antenna cable. Locate the inside antenna near where you'll typically be using the phone, for example, by the drivers seat or near a table where you typically sit. Power on the amplifier and you should immediately start receiving boosted signal.
See the below video an overview of how the Mobile 4G is typically installed in a car.