Wilson 841265 AG PRO 70 dB Dual-Band Omni Signal Booster Kit [Discontinued]

841265

Out of stock

  • There is a New Version of this Product

    The Wilson 841265 AG PRO 70 has been discontinued and replaced by the new and improved Wilson 460105 AG Pro 70 Yagi Kit.

    Go to the new Wilson AG Pro 70 Yagi

  • We're happy to offer free ground shipping on all orders over $99 to locations in the contiguous United States that are placed through our website, as well as discounted expedited shipping options if you need to receive your order sooner.

    All orders sent via free shipping or ground shipping may take between 1 and 3 days to ship from our warehouse. Orders with expedited shipping that are received before 2 pm Eastern, Monday through Friday, generally ship the same day, with all others shipping the following business day. If your order contains any products that are out of stock, pre-order, or back-ordered, it may take additional time to ship.

    Quotes, purchase orders, custom orders, and orders by resellers/integrators are not eligible for free shipping.

  • We're committed to providing you with the best customer experience, so you'll never pay more with Wilson Signal Booster.

    If you want to order from us, but you found a product on another site for less, then that's no problem at all. We'll match prices listed from any competitor's website or any other reputable source.

    Click here to learn more about our lowest price guarantee and how to place your order with the matched price.

  • At Wilson Signal Booster, we know that everyone’s situation is different, and in some cases, it’s possible that a signal booster may not work quite as well as you had hoped

    If you’re not satisfied with your purchase for any reason, we offer a 90-day return policy during which you can return your order for a refund.

    If you would like to return a product from your order, please call us at (888) 974-8237 and we will provide you with all of the information necessary to return the item.

This product has been discontinued and is no longer available.
Please contact us to learn about available replacement products.


You Should Choose This Kit If

You need an all in one solution to provide boosted voice calls and 3G data for multiple carriers and require coverage for an area up to 5,000 sq ft.* over one or multiple floors.

If you need to boost the signal from only one carrier, check out our DB Pro Yagi Kit (same coverage area) or our AG Pro 70 Yagi Kit (more coverage area).

Coverage Area

Many variables impact the total coverage area of a signal booster system. The following are estimates only and may not be accurate in any individual situation.

  • If you have an existing strong 5-bar outside signal, you may get up to 5,000 sq ft of coverage inside*
  • If you have an existing 3 to 4-bar (-90 dB) outside signal, you may get up to 2,250 sq ft of coverage inside*
  • If you have an existing 1 to 2-bar (-100 dB) outside signal, you may get up to 225 sq ft of coverage inside*
Pro Tip: The coverage areas above assume that you use the full 100 ft of coax cable. If you have a weak outside signal, use the shortest cables necessary while still maintaining at least 20 to 25 ft or more of separation between the two antennas. Using 50 ft of cable instead of 100 ft. can double your coverage area inside if you have a weak outside signal.

Supported Carriers

All carriers that use the standard dual band frequencies (800 MHz & 1900 MHz) for voice and 3G data, including:

  • AT&T 2G/3G/4G HSPA+ (shows as 4G on your phone)
  • Verizon 2G/3G
  • Sprint 2G/3G
  • US Cellular 2G/3G
  • Alltel 2G/3G
  • T-Mobile 2G only in most locations
  • Major Canadian Carriers 2G/3G
  • All other carriers using 800 MHz and 1900 MHz
  • Will not boost 4G LTE for any carrier

Kit Includes

Installation Overview

The AG Pro 70 is easy to install for anyone that's a bit handy. But if you're not comfortable getting up on your roof to mount an antenna, it may be best to find an electronics installer or a handy friend. We always recommend doing a soft install where you don't permanently mount anything or drill any holes until you know the system will work for you and you've identified the best locations for the antennas.  To install, just follow these 3 steps:

  1. To start, you'll need to find a place on the roof of your home or office to mount the outside omnidirectional antenna. Generally, the higher you can mount it, the better. Otherwise, look for the place on the roof that receives the best existing signal. Connect one of the RG-6 coax cables to the antenna and run it into the house. You may be able to enter through a vent or a soffit; otherwise, you may have to drill a hole.
     
  2. With the cable inside, connect it to an in-line lighting protector if you purchased one, and then to the amplifier. To the inside antenna port on amplifier, connect another cable and then connect the inside antenna. If you have an attic, the easiest installation method is typically to have the amplifier and inside antenna in the attic with the panel antenna face down on the floor in the middle of the house. If you don't have an attic, you can mount the panel antenna on the ceiling in the middle of the house, or on a wall.

  3. Once all of the components are connected, plug in the amplifier and see if you get any error codes. A red light indicates that the inside and outside antennas are too close together. Unplug the amplifier and then increase the separation between the antennas and try again. If you can't increase the separation, you can turn down the gain on the amplifier which will also decrease the total coverage area. For any other errors, consult the manual or contact us for help.

The included manual is very helpful and we recommend reading through it before beginning the installation. If you run into any issues, feel free to contact us for help. 

Benefits

  • Everything you need is in the box, just set it up and go
  • Reduces dropped calls and increases data speeds
  • Works wirelessly so you can use your cell phone like you always do
  • Supports multiple phones and data devices simultaneously
  • Adjustable per-frequency gain control makes installation easier
  • Contains carrier protection technologies to guard against overload and oscillation
  • Amplifies the signal both to and from the cell carrier
  • More than 20 times as powerful as a standard cell phone
  • Boosts both 800 (850) MHz Cellular and 1900 MHz PCS Bands
  • Extends the battery life of your phone
  • Made in the USA
  • FCC and IC type accepted


* The actual coverage area of a signal booster is dependent on many factors including existing outside signal strength, obstructions between you and the cell tower, the materials used in your home or office, the layout of the area you need to cover with a boosted signal, and other factors. The approximate coverage areas listed above are estimates. Actual coverage area will vary based on these and other factors. If you're not sure if a system will be powerful enough for your needs, contact us to find out.

Brand Wilson Electronics
Impedance 75 ohm
Power Requirements 110-240 V AC
FCC Notice
This is a CONSUMER device.
BEFORE USE

You May Also Want to Consider

Wilson 841265 AG PRO 70 dB Dual-Band Yagi Signal Booster Kit [Discontinued]
$699.95

There is a New Version of this Product

The Wilson 841265 AG PRO 70 has been discontinued and replaced by the new and improved Wilson 460105 AG Pro 70 Yagi Kit.

Go to the new Wilson AG Pro 70 Yagi

Wilson 841280 AG Pro 75 dB Dual-Band Omni Signal Booster Kit [Discontinued]
$1,199.95

There is a New Version of this Product

The Wilson 841280 AG Pro 75 has been discontinued and replaced by the new and improved Wilson 460105 AG Pro 70 Yagi Kit.

Go to the new Wilson AG Pro 70 Yagi

Wilson 841280 AG Pro 75 dB Dual-Band Yagi Signal Booster Kit [Discontinued]
$1,199.95

There is a New Version of this Product

The Wilson 841280 AG Pro 75 has been discontinued and replaced by the new and improved Wilson 460105 AG Pro 70 Yagi Kit.

Go to the new Wilson AG Pro 70 Yagi

Wilson 803470 Quint Selectable 75 dB 4-Band Signal Booster Kit [Discontinued]

As low as $0.00

There is a New Version of this Product

The Wilson 803470 Quint Selectable has been discontinued and replaced by the new and improved Wilson 461104 AG Pro Quint Kit.

Go to the new Wilson AG Pro Quint