The Wilson Signal 4G M2M Direct-Connect kit is the first five band direct-connect signal booster on the market, meaning it can boost all of the networks from all of the major carriers in the United States and Canada. The Wilson Signal 4G is designed to connect directly to a device that requires boosted signal, such as an ATM, vending machine, security system, remote monitoring, and more. The kit includes everything you need to get started, assuming that the antenna connector on the device that needs boosted signal is an SMA-Female connector. If not, then you'll need an adapter to connect the booster.
Wilson 460119 Signal 4G Kit with AC Power Adapter
This Wilson M2M direct-connect Signal 4G kit includes an AC adapter to power the Signal 4G amplifier. You should choose this kit if you have a standard outlet available to power the amplifier.
Wilson 460219 Signal 4G Kit with DC Hardwire Power Adapter
This Wilson M2M direct-connect Signal 4G kit includes a DC hardwire power adapter to power the Signal 4G amplifier. You should choose this kit if you need to hardwire in the power to the amplifier.
You Should Choose This Kit If
You have a device or machine that requires a boosted 3G or 4G LTE signal
The Wilson Signal 4G M2M Direct-Connect Booster Kit is designed to receive a 3G or 4G LTE signal from all major carriers in the United States, amplify it, and pass it directly to a device or machine that needs a better signal.
An M2M signal booster connects directly to the device or machine that it is providing boosted signal to, so there is no coverage area created with this type of booster.
The Wilson Signal 4G Signal Booster Kit supports the 2G, 3G and 4G LTE networks from virtually all carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you.
Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit:
- AT&T 2G, 3G, 4G HSPA+ & 4G LTE
- Verizon 2G, 3G & 4G LTE
- Sprint 2G, 3G & 4G LTE
- T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
- US Cellular 2G, 3G & 4G LTE
- All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz
Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.
- Wilson M2M 15 dB Direct-Connect Amplifier
- Wilson 4 in. Mini-Mag External Antenna (301126)
- Wilson AC or DC Hardwire Power Supply
- Wilson 3' RG174 coax cable with SMA adapters
- Instruction manual with Installation directions
|System Type||Direct-Connection to Phone or Data Device|
|Power Requirements||AC/DC 5V/2A|
|User and Installation Manual|
|Frequency Bands||700 MHz, 800 MHz, 1900 MHz, 1700/2100 MHz (AWS)|
|Specific Frequency (Up/Down)||704 - 716 MHz / 734 - 746 MHz, 776 - 787 MHz / 746 - 757 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1915 MHz / 1930 - 1995 MHz, 1710 - 1755 MHz / 2110 - 2155 MHz|
|Noise Figure||5 dB nominal|
|isolation||> 40 dB|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.