The Wilson Signal 3G M2M Direct-Connect Kit from Wilson Electronics is designed to boost the 2G and 3G networks from all of the major carriers in the United States and Canada directly to any device that needs better signal. Each kit includes everything you need to begin boosting signal directly to any device that uses an SMA-Female antenna connector (other connector types require an adapter). This kit is perfect for any device operating on either a 2G or 3G network, such as an ATM, vending machine, security system, monitoring device, cellular modem, and more.
Please Note: This device will NOT boost the 4G LTE high speed data network from any carrier. You'll want the Wilson Signal 4G M2M Direct-Connect Kit if you need an M2M booster for 4G LTE.
12" antenna with AC power supply
The 12" antenna is stronger than the 4" antenna, so if you need the most powerful type of outside antenna and an AC power supply, this is the option for you.
4" antenna with AC power supply
The 4" antenna is more compact than the 12" antenna, so if you need to locate the antenna in a tight space, and need an AC power supply, this is the option for you.
4" antenna with DC hardwire power supply
If you need a DC hard power supply, this is the option for you.
You Should Choose This Kit If
You have a device or machine that requires a boosted 2G or 3G signal
The Wilson M2M Direct-Connect Signal 3G Kit is designed to receive a 2G or 3G signal from pretty much any carrier in the United States and Canada, amplify it, and pass it directly to a device or machine that needs a better 2G or 3G signal.
An M2M signal booster connects directly to the device or machine that it is providing boosted signal to, so there is no coverage area created with this type of booster.
The Wilson Signal 3G Signal Booster Kit supports the 2G & 3G networks from virtually all carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you. This kit will not boost the 4G LTE networks from any carrier.
Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit:
- AT&T 2G, 3G & 4G HSPA+
- Verizon 2G & 3G
- Sprint 2G & 3G
- T-Mobile 2G & 3G
- US Cellular 2G & 3G
- All other carriers using 800 MHz & 1900 MHz
Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.
- Wilson M2M 15 dB Direct-Connect Amplifier
- Wilson Magnet-Mount External Antenna, either 4 in. (301126) or 12 in. (311125)
- Wilson AC or DC Hardwire Power Supply
- Wilson 3' RG174 coax cable with SMA adapters
- Instruction manual with Installation directions
|System Type||Direct-Connection to Phone or Data Device|
|Power Requirements||5V DC, 1A|
|User and Installation Manual|
|Frequency Bands||800 MHz, 1900 MHz|
|Specific Frequency (Up/Down)||824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz|
|Noise Figure||4 dB (nominal)|
|isolation||> 60 dB|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.